Flat Rooflights

We stock a wide range of high quality rooflights specially designed to meet the ethos of 'Maximise Daylight, Minimise Framework' to allow natural daylight into any room whilst boasting sky-only views, adding an elegant touch to any room. Our range of rooflight incorporates high quality rooflights from Glazing Vision, from slimline fixed rooflights to maintenance access rooflights, there is a product to suit any architectural need.

Filter & Sort

Filter & Sort

Filter & Sort Mobile filter close

Length
Width
Price
£
0
£
5723
Clear filters

FAQs

Delivery
Returning an Order
Flushglaze Product Information
Walk On Flushglaze Product Information
SkyHatch Product Information
VisionVent Product Information

rooflights.com offers fast and free delivery, meaning your rooflight or roof window will be with you in as little as 3-5 working days.

Please note, some made to order products are on an increased delivery, so please call if you have any doubt so this doesn’t effect your project timing.

Kerbside delivery in short means by the kerb. The delivery vehicle will park outside of your property or ‘nearest accessible point’. It is therefore the customer’s responsibility to move the product from the delivery vehicle to the point of storage or installation.

Due to the size and weight of some of our rooflights, it is recommended that you have suitable lifting equipment available on site for safe removal.

Yes, you can collect your Glazing Vision rooflights/roof window from us. A member of our team will contact you to arrange a time to collect from the manufacturing base in Diss, Norfolk.
No, our delivery costs are based on shipping via our pallet network to Mainland UK, Devon and Cornwall, Scotland, Channel Islands and the Isle of Wight only.

rooflights.com is committed to providing you with the highest standard of products and services. If there is any reason you feel dissatisfied with the service we have provided, or any of our products fail to meet your expectations, please get in touch with us. Our customer complaints procedure document outlines the different ways you can contact us.

Yes, you are welcome to cancel your order if your circumstances change, you will need to fill out and return our Cancellation Request Form to start the cancellation process.
Yes you do, please refer to our warranty document for full details.
You can return your product within 14 days after the day you receive the delivery. You must return the product no later than 14 days after the day on which you let us know that you wish to return the product. To check if your product is eligible for a return, and for timescales, please contact us on 01379 771002 at your earliest convenance.
The specified measurement is the External Weathered Kerb Dimension.
Our specialist range of rooflights is designed to be installed on an upstand with a minimum thickness of 75mm however, 100mm is recommended by Glazing Vision. Please note that if you are using annealed glass the thickness of the kerb cannot go above 150mm as this will cause increased thermal heat stress.
Yes, up to 70 Degrees
The specified measurement is the External Weathered Kerb Dimension.
You will need kerb top trim if the skylight will be visible from above. Kerb top trim is not included with the skylight but it can be purchased separately from our website
Yes, you will require an upstand with a minimum thickness of 100mm and a minimum height of 150mm however, a deck can be installed above the roof waterproofing that will be level with the glass as long as it is free draining to the waterproof deck below.
The specified measurement is the External Weathered Kerb Dimension.
No, the Glazing Vision SkyHatch is for maintenance access only, if you build a staircase under the product, you will not comply to Building Regulations and this could result in a large fine.
The specified measurement is the External Weathered Kerb Dimension.
The recommended pitch for the Chain Actuated VisionVent ranges from 3 to 70 degrees.
The skylight is designed for ventilation only. The VisionVent can not be used for access purposes.
The Rain and Temperature sensor works by detecting moisture in the air which triggers the unit to shut, allowing your property to stay safe and dry. The rain sensor will need to be mounted on to the frame of the product or nearby the roof.
View all faqs