Benefits
- Glass to glass silicone joins
- Thermally broken framework
- Modern contemporary design
- Dual colour as standard
- Quick and easy to install
Product Description
Our fixed lantern style rooflight is constructed of 4 glass facets at a pitch of 45 degrees, with glass to glass silicone joins at the hipped ends and along the ridge offering excellent light transmission.
The innovative aluminium framework is thermally broken with a combination of 28mm Polyamide breaks and factory applied PIR insulation. The internal framework has been re-designed at a 45 degree pitch to improve sight lines and maximise daylight.
As with all rooflights.com products the glass is toughened heat soak tested safety glass as standard with a high specification soft low e coating for improved thermal performance.
If you have a question about the product or installation please see our FAQs section.
For more specification information please go to:
www.glazingvision.co.uk
NEW for 2020! - ALL stock rooflights supplied with EnduroShield for free as standard*
* Terms and conditions apply
A revolutionary invisible treatment that repels water, soap scum and grime, allowing you easier cleaning less often.
Useful documents
Where Do I Measure To? 
CAD Drawings 
Easy Install Guide Important information
- HST toughened inner pane
- Strong safety glass designed to break into small pieces if broken These pieces may fall from the rooflight in the event of failure
- Upstand
- Min 110mm wide / 150mm high (by others)
- U-value (Ud)
- Values stated are for the whole rooflight including frame
- Weight
- 119 - 148 kgs
- Colour
- RAL7015 Slate Grey outer / RAL9010 Pure White inner
Glass specification
6mm clear heat soak tested toughened outer / 20mm Black silicone sealed argon filled cavity with warm edge spacer / 6mm clear soft low e heat soak tested inner.
